Models E9130H and E9130HT Economical Hermetically Sealed High-Speed SP3T Switch

                                                     

Contact Us     Application Notes for RF Switch

  • Low cost
  • Frequency range: 1 to 18 GHz
  • High speed: 10nsec rise fall times
  • Reflective and non-reflective models
  • High Performance
  • Improve in-band video leakage
  • Hermetically sealed
  • Low profile
  • Drop-in
Hermetically Sealed High-Speed SP3T Switch Model E9130H

The Model E9130H is a hermetically sealed, low cost high speed, SP3T PIN diode switch with integrated driver. The switch can be used as a drop-in module. The switch operates over the instantaneous frequancy range of 1 to 18 GHz.

The Model E9130HT is a non-relective version of this switch.

 

 

  FREQUENCY (GHz)
MODEL NO. CHARACTERISTIC 1—4 4—8 8—12.4 12.4—18
E9130H
Min. Isolation (dB)
Max Insertion Loss (dB)
Max. VSWR (ON)
60
1.2
1.75
60
1.5
1.75
60
2.0
1.75
50
2.6
2.0
E9120HT
Min. Isolation (dB)
Max Insertion Loss (dB)
Max. VSWR On
Max. VSWR Port Off
60
1.6
1.75
1.75
60
1.8
1.9
2.0
60
2.5
2.0
2.2
50
3.3
2.0
2.3

 

Power Supply Requirements
Standard Switch With Option 11 With Option 62
MODEL NO. +5V ±5% -12V ±5% +5v ±5% -5V ±5% +5V ±5% -15V ±5%
E9130H 110 mA max 65 mA max 110 mA max 65 mA max 110 mA max 65 mA max
E9130HT 110 mA max 65 mA max 110 mA max 65 mA max 110 mA max 65 mA max

 

Switching Characteristics
   Rise Time.......................... 10 nsec max.
   Fall Time............................ 10 nsec max.
   ON Time............................ 25 nsec max.
   OFF Time.......................... 20 nsec max.
   Max. Repetition Rate.....  20 MHz.
Power Handling Capability
   Without Performance Degradation
      Reflective Swtiches...... 200 mW cw or peak
      Non-Reflective Switches  
         Input to OFF port......... 100 mW cw or peak
         Input to ON port........... 200 mW cw or peak
         Input to COMMON port. 200 mW cw or peak
  Survival Power:
     Reflective Switches....... 1W average, 75W peak. (1µsec max. pulse width)
     Non-Reflective Switches
        Input to OFF port:........ 1W average, 10W peak (1 µsec max. pulse width)
        Input to ON.................. 1W average, 75W peak (1 µsec max. pulse width)
        Input to COMMON port 1W average, 75W peak (1 µsec max. pulse width) 
Control Characteristics
   Control Input Impedance TTL, 1-unit load
   Control Logic
      Logic "0".......................... (max. VIL = 0.8V) for switch ON
      Logic "1".......................... (min. VIH = 2V) for switch OFF

 

 

ENVIRONMENTAL RATING

1.    

Operating Temperature Range –  -54°C to +95°C.

2.      

Humidity – MIL-STD-202G, Method 103B, Condition B (96 hours at 95%).

 

3.        

Shock – MIL-STD-202G, Method 213B, Condition A (50G, 11 msec).

4.        

Vibration – MIL-STD-202G, Method 204D, Condition B (0.06” double amplitude or 15G,

5.      

Altitude – MIL-STD-202G, Method 105C, Condition B (50,000 ft.).

6.      

Temperature Cycling – MIL-STD-202F, Method 107D, Condition A (5 cycles.).

 

 

 

 

 

 

 

 

 

AVAILAVBLE OPTIONS
(Consult factory before ordering)
Option No.       Description
7 SMA male RF connectors all ports
9 Inverse control logic; logic "1" for switch ON and logic "0" for switch OFF
11 +5V, -5V operation
43* Internal video filter, all ports
49 High Reliability Screening
62 +5, -15V operation

*See Video Filter Options on Switches

DIMENSIONS AND WEIGHT
Model E9130H/HT


Dimensions and Weight for Hermetically Sealed SP3T Switches

Wt.: 0.70 oz. (20 gm) approx.
Dimensional Tolerances, unless otherwise indicated: .XX ±.02; .XXX ±.005