|
|
|
Switching Time |
|
|
ON Time..................................................... |
30 nsec max. |
|
|
OFF Time.................................................... |
30 nsec max. |
|
|
|
Power Handling Capability |
|
|
|
Without Performance Degradation............ |
500 mW cw or peak |
|
|
|
Survival Power........................................... |
1W average, 75W peak (1 µsec max. pulse width) |
|
|
|
Power Supply Requirements........................... |
+5V ±5%, 60 mA
|
|
|
|
|
–12V ±5%, 75 mA |
|
|
|
|
Control Charactristics
|
|
|
|
|
|
Contorl Input Impedance .......................... |
Schottky TTL, two unit loads. (A unit load is 2 mA sink current and 50 µA source current.)
|
Control Logic.............................................. |
Logic "0" (-0.3 to +0.8V) connects to J1 to J2 and J3 to J4
Logic "1" (+2.0 to +5.0V) connects to J1 to J4 and J2 to J3 |
|
|
OPTION (G09) ENVIRONMENTAL RATINGS |
Operating TemperatureRange......................... |
–54°C to +110°C
|
Non-Operating Temperature Range................ |
–65°C to +125°C |
Humidity.......................................................... |
MIL-STD-202F, Method 103B, Cond. B (96 hrs. at 95%) |
Shock.............................................................. |
MIL-STD-202F, Method 213B, Cond. B (75G, 6 msec) |
Vibration..........................................................
|
MIL-STD-202F, Method 204D, Cond. B (.06" double amplitude or 15G, whichever is less) |
Altitude............................................................
|
MIL-STD-202F, Method 105C, Cond. B (50,000 ft.) |
Temp. Cycling.................................................
|
MIL-STD-202F, Method 107D Cond. A, 5 cycles |
|
|